DIY Parts and accessories for Classic Mustangs, Jaguar IRS, and Hydraulic clutches
Check out the free tech on my YouTube channel

T5 hydraulic clutch bracket

T5 Hydraulic Clutch Bracket

  $99.99  + $20.00 S&H

Orders that are canceled will be refunded less the 3-6% fee that PayPal no longer returns when a refund is issued.

Back to Parts List Page

This T5 slave cylinder kit provides everything needed to install a slave cylinder on to a T5 transmission

T5 Hydraulic Clutch Brackets                Firewall Reinforcement plate

Mounting hardware

The master cylinder, slave cylinder, push rods  and connecting lines are not included as different applications my require variations of these parts. (however I do offer a MC and line kit, see "Related Parts" below)

New and improved design!  The slave cylinder mounting holes on the bracket have been elongated so you can use them with my slave cylinder or another slave cylinders of your choosing. SC Mounting Holes 2.38" Center to Center X 2" Center to Center

Note when ordering: 67-70 Mustangs use a different kit than the 65-66 Mustangs.  ALSO double check your bellhousing to confirm which kit you need. Some newer bellhousings have the clutch fork in a lower location. Please see picture below.  The bellhousing on the right works with a 94-95 T5 kit and the bellhousing on the left requires the 86-93 (Foxbody) T5 kit.

International Shipping Available.  Email me for additional cost information

Which Bellhousing do you have? 94-95 bellhousings kits are on a different page

86-93                                       94-95

Suggested Parts

New and reproduction parts
    If you need to order replacement reproduction parts for your Mustang make sure you check out Steve's Mustang Parts.

2013 DazeCars
The words / logos for Ford, Jaguar, Mustang, Galaxie, etc are used for descriptive and reference purposes only. DazeCars is neither affiliated with Jaguar Land Rover North America LLC, Ford Motor Company nor the manufacturers/distributors of Ford or Jaguar automobiles.