DIY Parts and
accessories for Classic Mustangs, Jaguar IRS, and Hydraulic clutches
Check out the free tech on my YouTube channel
|
|
|
17/32”
drill bit
|
Orders that are canceled will be refunded less the 3-6% fee that PayPal no longer returns when a refund is issued.
Back to Parts List Page
|
For best
results when performing the UCA drop a 17/32" drill bit is
needed to correctly size the new holes. This bits can be hard to
find
locally and expensive. These are medium quality bits made of M7
high
speed steel. They will work many times to inlarge an egsisting
1/2"
For best results I recommend drilling one drill bit size at a time and
finishing with the 17/32" bit, using lots of cutting oil, and not using
a high torque drill that could break the bit.
|
|
For more information
on how to do a 1" UCA drop see my DazeCars tech article.
|
International
Shipping Available.
Email me for additional cost
information
Suggested
Parts
New
and reproduction parts
If
you need to order replacement reproduction parts for your Mustang make
sure you check out Steve's Mustang Parts.
|
|
© 2013
DazeCars
The words / logos for Ford, Jaguar, Mustang, Galaxie, etc are used for
descriptive and reference purposes only. DazeCars is neither affiliated
with Jaguar Land Rover North America LLC, Ford Motor Company nor the
manufacturers/distributors of Ford or Jaguar automobiles. |
|
