DIY Parts and
accessories for Classic Mustangs, Jaguar IRS, and Hydraulic clutches
UCA drop kit
|Orders that are canceled will be refunded less the 3-6% fee that PayPal no longer returns when a refund is issued.
Back to Parts List Page
is a steel templates and 17/32" drill bit, being sold together as a
kit for doing the UCA drop on a 64 & 1/2 - 66 Mustang. This
kit works on early Mustangs, and
Falcons. The template is made of 1/16" plate steel and is CNC cut for
accuracy. It bolts into the
shock tower in the stock A-arm location and allows you to drill
two pilot holes in the improved suspension location. The
template is then removed and the pilot
holes can then be enlarged to accept the UCA bolts. The drill bit
ia a medium quality bit made of M7 high speed steel. It will work
many times to inlarge an egsisting 1/2" hole so for best results I
recommend drilling one drill bit size at a time and finishing with the
If you are ordering this template for a car other than a Mustang,
before ordering please measure the distance
between the UCA studs on your car. A 3.75" measurement requires
template and a 4.75" measurement requires the 67-70
Only one template is needed as you use the same template to drill the
pilot holes on both sides.
Email me for additional cost
and reproduction parts
you need to order replacement reproduction parts for your Mustang make
sure you check out Steve's Mustang Parts.
The words / logos for Ford, Jaguar, Mustang, Galaxie, etc are used for
descriptive and reference purposes only. DazeCars is neither affiliated
with Jaguar Land Rover North America LLC, Ford Motor Company nor the
manufacturers/distributors of Ford or Jaguar automobiles.